

d9g winch cat pt 2
Posted by Administrator in D9G CAT Videos, Our Videos, tags: d9g caterpillar, D9G winch cat, d9g winch cat pt 2, Quiring towingD9G winch job in Hixon, Britsh Columbia.
Tweet
![]() ![]() d9g winch cat pt 2Posted by Administrator in D9G CAT Videos, Our Videos, tags: d9g caterpillar, D9G winch cat, d9g winch cat pt 2, Quiring towingD9G winch job in Hixon, Britsh Columbia. Tweet |
12:55 pm on January 25th, 2010
[..YouTube..] Must have been a SNAFU.
12:55 pm on January 25th, 2010
Must have been a SNAFU.
8:30 pm on July 1st, 2010
[..YouTube..] How many pounds is the cat winch rated at?
8:30 pm on July 1st, 2010
How many pounds is the cat winch rated at?
9:31 pm on July 15th, 2010
[..YouTube..] 1/2acording to the hyster manual, when the scale goes off the chart it shows 160,000 lbs line pull at 40 feet /per minute, at the bottom of the page, in large letters it says winch capactities is determinded by the size of the cable, in larger letters, it says this winch has capactities to break any practical sized cable. compared to a D8 with the same winch, there is about 60,000 lbs line pull less then a D9, and of course no machine will pull more then its own weight and a word of caution,
9:31 pm on July 15th, 2010
1/2acording to the hyster manual, when the scale goes off the chart it shows 160,000 lbs line pull at 40 feet /per minute, at the bottom of the page, in large letters it says winch capactities is determinded by the size of the cable, in larger letters, it says this winch has capactities to break any practical sized cable. compared to a D8 with the same winch, there is about 60,000 lbs line pull less then a D9, and of course no machine will pull more then its own weight and a word of caution,
9:37 pm on July 15th, 2010
[..YouTube..] 2/2if your going tie the machine down to pull a good rule of thumb is to keep your head down as well, normally I use 1 3/8ths cable, but on the pipe line jobs I used 1″ cable for the length of the pull
9:37 pm on July 15th, 2010
2/2if your going tie the machine down to pull a good rule of thumb is to keep your head down as well, normally I use 1 3/8ths cable, but on the pipe line jobs I used 1″ cable for the length of the pull
8:02 pm on November 28th, 2010
[..YouTube..] I machine those winches ๐ good to see one in action.
8:02 pm on November 28th, 2010
I machine those winches ๐ good to see one in action.